LubeRight

luberight logo LubeRightThe LubeRight is a computer-aided manual greasing system that offers the following advantages compared to traditional manual greasing:

  • LubeRight identifies each lube point and shows the exact amount of grease to be fed. An accurate lubrication extends the life of all bearings.
  • It confirms each lube point and prevents that any point might be forgotten.
  • It enables a follow-up through historical data of everysingle lube point.

luberight1 LubeRight All lube points are equipped with a transponder (a chip baked into a washer-like envelope). The chip holds a unique identification number enabling the system to recognize each lube point. The amount of grease that is to be fed into a lube point is stored in the memory of the grease meter and is shown on the display. The grease meter registers the actual amount fed into the lube point. When the greasing round has been performed the results are transferred to a PC. The computer program shows how much grease has been fed into every lube point and any deviations, if any, to the set value. The system clearly warns if, for example, a lube point has been forgotten. The LubeRight system gives the user a clear general view of the manual greasing and a more reliable maintenance. It effectively reduces the risk of unscheduled production breakdowns. LubeRight is a tool that makes manual lubrication reliable. Greasing will become a high-tech activity! The LubeRight software is  installed in the PC. In the administration part of the program the data of each lubrication point is stated: name, group, lubricant amount, interval, lubricant and round order number. Each lubrication point is connected to a specific transponder. The nipples with their transponders are then mounted on to the lubrication points. The system then is ready for use. This is how LubeRight works, step by step

  1. The LubeRight software is installed in the PC. In the administration part of the program the data of each lubrication point is stated: name, group, lubricant amount, interval, lubricant and round order number. Each lubrication point is connected to a specific transponder. The nipples with their transponders are then mounted on to the lubrication points. The system then is ready for use.
  2. When the lubrication shall be carried out the schedule part of the program is opened and you can see the lubrication points which are planned for the present week. You connect the grease meter to the computer and transfer the planned lubrications to the grease meter. When you connect the grease meter’s nozzle to a nipple the grease meter reads the lubrication point’s identity and the planned lubricating amount is shown on the display. During the lubrication the amount on the display is counted down, you shall stop the lubrication when the display shows 0. The exact amount of grease that has been fed into each lubricated point is stored in the memory of the grease meter.
  3. When the lubrication round is completed, you connect the grease meter to the computer again and transfer the data of the performed lubrications to the computer. You can then immediately see if you have missed any lubrication points and can correct that. When all lubrication points have been lubricated as planned the list will become green. You can then be sure that you have performed your work properly! Afterwards the computer shows for each lubrication point when it has been lubricated and with how much grease.

Pleasea contact us for more information on the LubeRight