Combustion Efficiency Analyzers (Flue Gas Analyzers)

12-page HVACR Combustion Catalog

Quick and simple set up
All TPI analyzers feature quick and simple set up. Fast purge and the ability to perform fuel selection during start up enable tests to be performed quickly without requiring extra set-up time after initial start up. TPI analyzers also use the last selected fuel as the default setting. This feature prevents the need to perform fuel selection every time the analyzer is turned on

The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

Use TPI analyzers to test flue gases in gas and oil fired equipment including high efficiency furnaces and condensing boilers. Measure CO, O2, and stack temperature. Determine combustion efficiency, CO2, and CO air free. Some models include built-in differential manometer, combustible gas detection, PC communication, data logging, and can measure NO / NOX.

Model	Description	Additional Information
708:	708: Combustion Efficiency Analyzer • Measure CO, and temperature • Calculate CO2, efficiency, excess air, and CO air free	Data Sheet  Instruction Manual   Features/Functions
709:		Data Sheet  Instruction Manual   Features/Functions
709R:	709R: Combustion Efficiency Analyzer w/ Differential Manometer • All the features of the 709 PLUS rechargeable batteries • Measure CO, and temperature • Calculate CO2, efficiency, excess air, and CO air free	Data SheetInstruction Manual   Features/Functions
712:	712: Deluxe combustion efficiency analyzer with optional PC interface • All the features of the 709R PLUS checks combustibles in flue, optional PC interface	Data Sheet  Instruction Manual   Features/Functions
714:	714: Combustion efficiency analyzer with NOX and optional PC capability • Measure 02, CO, and NOX • Calculate CO2, NOX, efficiency, excess air	Data Sheet  Instruction Manual   Features/Functions
715:	715:High CO (above 10,000ppm carbon monoxide) combustion analyser with built-in differential thermometer, differential manometer, and NO measurement & NOX calculationsThe optional A784 flow regulator to reduce the flow rate of the gas being sampled to measurable levels on high pressure systems such as gas compression engines. The A784 is included in the 715K3 kit.	Data Sheet  Instruction Manual   Features/Functions
715K3	715K3: Gas Compression Engine Service Kit High CO (above 10,000ppm carbon monoxide) combustion analyzer with built-in differential thermometer, differential manometer, and NO measurement & NOX calculation	Data Sheet  Instruction Manual   Features/Functions