Home Multimeters (DMMs)

Multimeters (DMMs)

TPI offers Digital Multimeters to fit a wide range of applications including electrical, electronic, commercial, HVAC/R, and industrial.

Model

Description

Additional Information

460:

460 Multimeters (DMMs)

The 460 hand held oscilloscope features a 3” x 3” cold cathode
fluorescent display providing test data in a clear easy to see format. The
cursor readout function allows the width and amplitude of a signal to be
measured precisely instead of trying to figure it out manually.

4,000 count true RMS DMM, CACV, DCV ohms and continuity buzzer need optional
adapters for current measurement
20 MHz Bandwidth
Cursor Readout
Decibels
Pre and Post Triggering
Trend Mode
Dual Input
Real Time Sample Rate
Bright LCD Backlight
Optically Isolated RS232 Output
Continuous Autoset
cULus 61010-1
CAT II – 1000V, CAT III – 600V
3 Year Limited Warranty

Product Sheet
Instruction Manual

440:

440 Multimeters (DMMs)

The hand held 440 scope plus features an easy to use combination of a
single input 1 MHz oscilloscope with True RMS DMM.

True RMS Auto Ranging DMM offers increased accuracy over average responding
multimeters
1MHz Oscilloscope can be used to view power signals to determine quality as
well as correct amplitude and frequency, assisting in finding and preventing
problems
Trend Mode enables surges and dropouts to be graphed.
Communication to a PC using optional RS-232 cable and software
cULus 61010-1
CAT II – 1000V, CAT III – 600V
3 Year Limited Warranty

Instruction Manual

196:

196 Multimeters (DMMs)

0-24 mA output built in for process loop calibration, 0.05% accuracy,
50,000 counts, DMM with separate fuse and battery compartment

Process DMM with 0 to 24mA output
50,000 count display
0.05% DCV basic accuracy
0 to 750 ACV; max resolution 100uV
0 to 1,000 DCV; max resolution 0.001mV
0 to 50MΩ; max resolution 0.01Ω
Audible continuity
AC/DC amps up to10 amps; max resolution 0.01uA
Analog bar graph
Min/Max
Data hold
Power off
Separate fuse and battery compartment
cULus 61010-1
CAT II-1000VDC, 750VAC, CATIII-600V
Limited Life time Warranty

Product Sheet Instruction Manual

194:

194 Multimeters (DMMs)

CAT IV 600 ACV, data logging, 0.05% accuracy, 50,000 count, True RMS
DMM with separate fuse and battery compartment

Data logging
50,000 count display
0.05% DCV basic accuracy
True RMS
Inductance
Frequency
Capacitance
0 to 750 ACV; max resolution 100uV
0 to 1,000 DCV: max resolution 0.001mV
0 to 50MΩ; max resolution 0.01Ω
Audible continuity
AC/DC amps up to10 amps; resolution 0.01 uA
Analog bar graph
Min/Max
Data hold
Power off
Separate fuse and battery compartment
cULus 61010-1
CATIII-1000VC, CATIII-1000V, CAT IV-600V, CAT III 1000V
Limited Life time Warranty

Data Sheet
Instruction Manual

192:

192 Multimeters (DMMs)

Data logging, 0.05% accuracy, 50,000 count, True RMS DMM with
separate fuse and battery compartment.

Data logging
50,000 count display
0.05% DCV basic accuracy
True RMS
Inductance
Frequency
Capacitance
0 to 750 ACV; max resolution 100uV
0 to 1,000 DCV: max resolution 0.001mV
0 to 50MΩ; max resolution 0.01Ω
Audible continuity
AC/DC amps up to10 amps; resolution 0.01 uA
Analog bar graph
Min/Max
Data hold
Power off
Separate fuse and battery compartment
cULus 61010-1
CAT II-1000VDC, 750VAC, CAT III – 600V
Limited Life time Warranty

Product Sheet Instruction Manual

183A:

183A Multimeters (DMMs)

True RMS DMM with temperature, capacitance, duty cycle, &
low-pass filter

4,000 count
True RMS for more accurate measurements
Auto/manual ranging
Temperature measurement
Duty cycle to measure the amount of time the motor is on
Low pass filter for noisy environments
Separate fuse (2) and battery compartment
Auto power off
IR serial interface
cULus 61010-1
CAT II – 1000V, CAT III – 600V
3 Year Limited Warranty
Applications
Test run and start capacitors
Measure ambient and duct temp.
Test control (thermostat, thermocouple, flame safety) and line voltages
Measure resistance and test for continuity
Line current up to 10 amps (in series)

Data Sheet
Instruction Manual

163:

163 Multimeters (DMMs)

Full size DMM with analog bar graph; 1,000 DC volts and 750 AC volts;
0.5% DCV basic accuracy

3260 count display
0.5% DCV basic accuracy
0 to 750 ACV; max resolution 1mV
0 to 1,000 DCV; max resolution 0.1mV
0 to 32.6MΩ; max resolution 0.1Ω
Audible continuity
0 to 10 amps AC/DC; max resolution 0.1uA
Analog bar graph
Data hold
Sleep mode/auto off
cULus 61010-1
CAT II – 1000V, CAT III – 600V
3 Year Limited Warranty

Product Sheet
Instruction Manual

153:

Full size DMM with capacitance; 1,000 DC volts and 750 AC volts; 0.5%
DCV basic accuracy

4,000 count display
0.5% DCV basic accuracy
0 to 750 ACV; max resolution 0.1mV
0 to 1,000 DCV; max resolution 0.1mV
0 to 40MΩ; max resolution 0.1Ω
0 to 10 amps AC/DC; 0.1uA resolution
Data hold
cULus 61010-1
CAT II – 1000V, CAT III – 600V
3 Year Limited Warranty

Product Sheet
Instruction Manual Specifications Applications

133:

Large easy to read display in full size DMM; 1,000 DC volts and 750
AC volts; 0.5% DCV basic accuracy

Large easy to read 2,000 count display
0.5% DCV basic accuracy
0 to 750 ACV; max resolution 1mV
0 to 1,000 DCV; max resolution 0.1mV
0 to 20MΩ; max resolution 0.1Ω
0 to 10 amps AC/DC; max resolution 0.1uA
Data hold
cULus 61010-1
CAT II – 1000V, CAT III – 600V
3 Year Limited Warranty

Product Sheet
Instruction Manual

126:

126 Multimeters (DMMs)

Compact autoranging DMM with 0.3% DCV basic accuracy and 400mA AC/DC
range

4,000 count display
0.3% DCV basic accuracy
0 to 600 volts AC/DC; max resolution 0.1V
0 to 40MΩ resistance; max resolution 0.1Ω
Audible continuity
0 to 400 mA amps AC/DC; max resolution 0.01mA
Autoranging
Min/Max
Data Hold
Sleep mode/auto off
cULus 61010-1
CAT II – 1000V, CAT III – 600V
3 Year Limited Warranty

Product Sheet Instruction Manual

122:

122 Multimeters (DMMs)

Compact DMM with adapter range for optional accessories, 0.5% DCV
basic accuracy

2,000 mvDC (2 DCV) adapter range
2,000 count display
0 to 600 volts AC and DC
0 to 2,000 ohms
Audible continuity
10 MOHM internal impedance
0.5 % DCV basic accuracy
cULus 61010-1
CAT II – 1000V, CAT III – 600V
3 Year Limited Warranty

Product Sheet
Instruction Manual

120:

120 Multimeters (DMMs)

Compact, manual ranging, basic DCV 0.5% accuracy DMM

2,000 count display
0 to 600 volts AC and DC
0 to 2,000 ohms
Audible continuity
10 MOHM internal impedance
0.5% DCV basic accuracy
cULus 61010-1
CAT II – 1000V, CAT III – 600V
3 Year Limited Warranty

Instruction Manual

100:

No more guessing what range to switch your meter to — the TPI 100
does it automatically!

Instruction Manual

Tech Tips