Pocket Inspection
Pocket Inspection Product Overview
Affordable and easy to use inspection system that allows the user to simply and quickly enter lists of questions that any non-skilled operator can answer by simply touching the screen of an ultra rugged (waterproof and droppable) handheld Pocket PC.
Comes complete with C-Cubed’s world leading C-Trend PC software to give full asset management capability. C-Trend can automatically generate email reports with alarms, exceptions etc.
Contains user editable “pre-canned” inspections (motors, pumps, gearboxes etc.) or simply make up your own: “Is the floor clean?”, “Are the lights working?”, “Is the fire extinguisher in date?” etc.
Pocket Inspection Features
- Full graphical trending of all vibration data with color coded alarms and asset status
- Easy set-up Asset Wizard™ with built-in industry standard settings for motors, pumps & fans
- Diagnoses and displays out-of-balance, misalignment, looseness and bearing faults
- Automatic user-editable report generation
- Self-identifying “smart” accelerometer
- Automatic measurement point recognition using barcodes etc.
- Easy navigation: simply point and click
- Display and trend important additional user-defined process information e.g. oil pressure, bearing temperature
Pocket Inspection Benefits
- Pocket inspection is an easy to use hand held tool for carrying out inspections – which anyone can use!
- Simple answers to questions are selected by touching the screen (or via the key pad)
- Responses can be color coded (Green, Amber, Red) with an alarm status (OK, Warning or Critical)
- PC software highlights any problem areas by displaying the alarm status
- Uses “pre-canned” inspections or simply make up your own lists of questions to create new inspections for download to the hand held unit
- Alarms can be automatically reported via email when inspection results are uploaded from the hand held unit to the PC
Click here to learn more
Size
220 mm x 95mm x 45mm
Weight
500g (not including accelerometer)
Environmental
Water: MIL-STD-810F, Method 512.4IP67 sealed against accidental immersion(1m for 30 min)
Drop: MIL-STD-810F, Method 516.5, Procedure IV
26 drops from 1.22 m
6 additional drops at -20º
6 additional drops at 60º
Operating: -30º to 65º
Storage: -40º to 70º
Humidity: MIL-STD-810F, Method 507.4
Sand & Dust: IP67, MIL-STD-810F, Method 510.4,
Procedures I & II
Battery life
Typically 8-20 hours operating time depending
on backlight usage.
Maximum freq range
10 Hz to 15 kHz
Resolution
400, 800, 1600 or 3200 lines
Input range
+/- 50g with standard 25mV/g C-Cubed
accelerometer
Dynamic range
+/- 50g to +/- 0.0004g with standard
accelerometer
VA Bands
4 user definable frequency ranges.User definable band descriptor names.Auto set up of VA band limits (x = run speed)Instability 10Hz – 0.75xUnbalance 0.75x – 1.5x
Alignment 1.5x – 2.5x
Looseness 2.5x – 3.5x
Accelerometer Connection
Standard 10 pin IP67 connected smart accelerometer with built-in ID and sensitivity
calibration (nominally 25mV/g)
Optional IP67 BNC connected constant current accelerometer (nominal +20v supply @ 1mA)
Alarms
User settable on any vibration parameter (acceleration, velocity, bearing quality etc.)
Preset alarm levels
(Velocity)
Valid data 0.1 mm/s
Warning 2.8 mm/s
Alarm 7.1 mm/s
Color coded readings
Red: alarm
Amber: warning
Green: valid
Keypad operation
Stylus free collection of vibration data
Options
Barcode Scanner
Carrying case with neck strap
Extended End Cap with BNC connector and constant current
accelerometer interface
Stylus lanyard
<em>Pocket Inspection</em> Specifications
- AA dry cell power boot module Nomad (C307-213)
- Nomad carry case with neck strap and belt clip (C307-214)
- Stylus lanyard (C307-204)
- Rechargeable power boot Nomad (C307-212)
- 12 volt in-vehicle charger Nomad (C307-215)
- Stylus (Nomad) (C307-216)
- Docking cradle (Nomad) (C307-217)
- RFID Tags (200) (C307-218)
- RFID Tags (100) (C307-129)
- RFID tags (25) (C307-128)
Download Product Overview
