Home Pocket Lube

Pocket Lube

Pocket Lube Overview:

Easy to use lubrication control system that gives the user the complete picture by recording the bearing noise BEFORE, DURING and AFTER lubrication.

Both Under and Over lubrication can cause bearing damage. Pocket Lube helps you get it right.

Control lubrication costs by only lubricating when necessary and using the correct amount of lubricant.

Gives the user total control of lubrication!

Pocket Lube Features :

Measures bearing noise before, during and after lubrication
Determine optimum lubrication levels
Record and trend lube usage
Auto identifies lube points and lube type
Easy to follow routes
Record and trend ALL process info.
Save readings to RFID tags

Pocket Lube Benefits :

Pocket Lube is a revolutionary new concept that allows users to determine the optimum amount of lubrication to add to bearings. It works by monitoring the bearing noise before, during and after the addition of lubricant.
Easy to read display shows bearing noise in bearing damage units (BDUs).
Lubrication points and lube type can be automatically identified using RFID tags and readings can be saved to tags for later recall.
System records and trends bearing noise and amounts of lubricant used to give full lube history.
Saves ANY process readings for later recall and trending on PC.
Can be upgraded to Pocket VibrA full asset management system complete with process data trending, alarming, automatic report generation and graphical display of multiple frequency spectra etc.

Pocket Lube Specifications :

Size 220 mm x 95mm x 45mmWeight 500g (not including accelerometer)EnvironmentalWater:MIL-STD-810F, Method 512.4IP67 sealed against accidental immersion(1m for 30 min)Drop:MIL-STD-810F, Method 516.5, Procedure IV26 drops from 1.22 m

6 additional drops at -20º

6 additional drops at 60º

Operating: -30º to 65º
calibration (nominally 25mV/g)

Storage: -40º to 70º

Humidity: MIL-STD-810F, Method 507.4

Sand & Dust: IP67, MIL-STD-810F, Method 510.4,

Procedures I & II

Battery life

Typically 20 hours operating time depending on backlight usage

Power Supply

Rechargeable battery (charger included)

Displayed Units

Bearing noise in BDU (bearing damage units)

100 BDU – 1g RMS

RFID (optional)
13.56 MHzI-Code SLRFID data format
Stores lube point IDLast readingLube type etc.Accelerometer ConnectionStandard 10 pin IP67 connected smart accelerometer with built-in ID and sensitivity

Keypad or Touch Screen Operation

Stylus free collection of vibration data using single key press or touching screen

Displayed Lube Units

Number of pumps added Liters, cc’s,Fluid Ounces or user defined

Options

Carrying case with neck strap, Stylus lanyard, Docking Station, AA battery module