• Vibration analysis gives you the information you need for accepting new equipment, identifying problems for repair, and after overhaul to assure machinery reliability.

Rotalign instruments assure the best possible shaft alignment and soft foot correction.  Alignments can be performed with or without the coupling installed. We provide the top of the line stainless steel shims in 5 sizes and a variety of thickness for vertical and horizontal orientations, including compensation for thermal effects

Roll paralellism has a very significant influence on product quality in a great variety of industries. Be it in the paper, wood, textile, aluminium or Steel industry, roll parallelism has been measured and aligned for more than 100 years.

Typically we are dealing with machine guides which transport the product rapidly through a number of tooling stages. Our  equipment  measures over a range of 1-40 meters where accuracies of < 0.1mm are required in both the vertical and horizontal planes.

You need to level your machine or a series or disconnected planes. Using the T310 precision sweep laser you have a reference plane of more than 50 meters in all directions which adjusts itself to level all the time. You can use several sensors at the same time if needed.

Excessive Vibration in rotating machinery can cause unacceptable levels of noise and, more importantly, substantially reduce the life of shaft bearings

The straightness or linearity of the bore centres is a critical issue not only for Diesel machine builders or ship builders, but it is also of great importance to Crane repair companies. In this measurement it is important that the roundness of the bore as well as its relative position to other bores be monitored as part of the measurement. .