PO Box 5238, The Reeds, Centurion, 0158, Tel : +27 12 661 7844, Fax: + 27 86 670 9045
- The HS 500 family is a cost-effective on-line protection system using the DIN rail mounted approach, enabling it to be used as a modular monitoring/protection system for both acceleration and temperature measurements
Input - 100mV/g Constant Current Accelerometers (HS-100 Series)
Output - AC and 0-10 Volts
proportional to either...
(a) RMS Velocity or
(b) Envelope 'g'
(c) AC 'g' via BNC
(d) AC Enveloped 'g'
'Sensor OK' Function
Function:
Converts 0-10V to 4-20mA
Slim Line
DIN Rail mounted
Input - 100mV/g Constant Current Accelerometers (HS-100 Series)
Outputs - via BNC or screw terminals
Input - 100mV/g Constant Current Accelerometers (HS-100 Series)
Outputs - AC and 4-20mA
a) AC 'g' 100 mV/g via BNC
b) 4-20mA proportional to velocity
Powers HS 500 Series
DIN Rail Mounted
Input - 115/240 VAC (TBC)
Output - 24 Volts DC
- Accommodates HS 500 modules, complete with viewing window panel to enable status of the channels to be monitored. Hinged Box for easy access for data collection
Flashing Beacon
Klaxton
Custom Filters/Modules
Wireless Retransmit
.jpg)
Interface Module with special filtering designed to highlight failure mode
Input - 0-10V DC or4-20mA accelerometer
(HS-420 Series),
Temperature
Output - Pre-programmable, 2 trips, retransmit 4-20mA and 0-10 Volts
Start up Protection
Input - 100mV/g Constant Current Accelerometers (HS-100 Series)
Outputs:
AC, 4-20 mA and 0-10 Volts proportional to either:
(a) RMS Velocity
(b) Peak 'g'
(c) AC 'g'
'Sensor OK' Function
Input - 100mV/g Constant Current
Accelerometers (HS-100 Series)
Outputs:
Voltage Gain x1, x10, x100
selectable via DIL switch
'Sensor OK' Function
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
| ||
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
